Konica Minolta BIZHUB C360 - Manual (Page 22)

bizhub C360/C280/C220 3-11
3.3 Installation using Add Printer Wizard 3
11
Change the settings according to the port, and then click [OK].
% For LPR connection, select [LPR], and then enter [Print] in the [Queue Name:] box.
% You must discriminate between upper and lower case letters when entering it.
% For Port9100, select [Raw], and then enter a RAW port number (initial setting: [9100]) in the [Port
Number:] box.
12
Click [Next].
The [Install the printer driver] page appears.
13
Click [Have Disk...].
14
Click [Browse...].
15
Select a desired fax driver folder on the CD-ROM, and then click [Open].
% Select a folder according to the printer driver, operating system, and language to be used.
16
Click [OK].
The [Printers] list appears.
17
Click [Next].
18
Follow the instructions on the pages that follow.
% If the [User Account Control] window appears, click [Continue].
% If the [Windows Security] window for verifying the publisher appears, click [Install this driver soft-
ware anyway].
19
Click [Finish].
20
After finishing the installation, make sure that the icon for the installed printer is displayed in the [Print-
ers] window.
21
Remove the CD-ROM from the CD-ROM drive.
This completes the fax driver installation.
d
Reference
If both [RAW Port Number] and [LPD Setting] are enabled in the network settings for this machine, check the
enabled port, and then change it if necessary. For details, refer to the [User's Guide Print Operations].