Konica Minolta bizhub PRESS 1052 - Manual (Page 8)

bizhub PRESS 1250/1250P/1052 1-5
1.2 Safety Precautions 1
Power Plug
Actions in Response to Troubles
Do not unplug or plug in the power cord with a wet hand,
as you could receive an electrical shock.
Plug the power cord all the way into the power outlet.
Failure to do this could result in a fire or an electrical shock.
Do not tug the power cord when unplugging. Tugging the cord to
do this could damage it, resulting in a fire, electrical shock, or
breakdown.
Remove the power plug from the outlet more than one time a year
and clean the area between the plug terminals. Dust that accumu-
lates between the plug terminals may cause a fire.
Do not place any objects around the power plug, as the power
plug may be difficult to pull out when an emergency occurs.
If it becomes inordinately hot or emits smoke, or an unusual odor
or noise, immediately turn off the power switch of the product, and
then unplug the power cord from the outlet and contact your au-
thorized customer engineer.
If the units have been dropped or the covers damaged, immedi-
ately turn off the power switch of the product, and then unplug the
power cord from the outlet and contact your authorized customer
engineer. If you continue using it in this condition, a fire or electri-
cal shock could result.
The inside of this product has areas subject to high temperature,
which may cause burns. When inspecting the inside of the product
such as when replacing the units, do not touch the locations
(around the fusing unit, etc.) which are indicated by a "High Tem-
perature" caution label.