Konica Minolta bizhub PRESS 1052 - Manual (Page 16)

bizhub PRESS 1250/1250P/1052 2-6
2.2 Installation Procedures 2
2
Remove the 4 screws, and then install the 4 positioning
screws instead.
3
Open the small size guides (front/rear) to the direction of
arrow to set the guides to the positions illustrated below.
4
Install the auxiliary guides (front/rear) and secure them with
2 stoppers.
% To insert the auxiliary guides (front/rear) into the holes
in the bottom plate of the tray, move the side guides to
align the notches in the bottom tray.
5
Move the 2 duct lock levers to the direction of arrow to lock
them.