Konica Minolta bizhub PRESS 1052 - Manual (Page 22)

bizhub PRESS 1250/1250P/1052 3-5
3.1 Removal Procedures 3
4
Move the 2 duct lock levers to the direction of arrow to un-
lock them.
5
Move the small size guides (front/rear) to the direction of
arrow to align them with the side guides.
6
Remove the 2 duct covers.
NOTICE
Be sure to remove the duct covers when loading paper of
regular sizes.
% Remove the 2 screws to detach the resin member.
% Remove the duct covers, then reinstall the resin mem-
ber. (2 screws)
NOTICE
Make sure the connector is plugged before reinstalling the
resin member. Be also careful not to catch the bundled ca-
bles.
7
Push in the tray until it locks into place.