Konica Minolta bizhub C3110 - Manual (Page 74)

6-14 bizhub C3110
Using the copy function 6 6.4
6.4.2 Introduction of copy function
This section describes the convenient copy functions. For details on how to use each function, refer to [User's
Guide: Copy].
Function Overview
[Original Size] Select the size of the original to be scanned.
[Zoom] You can copy an original image enlarged or reduced by an arbitrary zoom ratio.
[Quality] - [Original
Type] Select the optimum settings for the original to copy it at the optimum image
quality level.
[Quality] - [DENSITY] Adjust the density of a copy image.
[Quality] - [Bkgd. Re-
moval] Adjust the background density of an original with the colored background such
as newspaper or an original made from recycled paper.
[Quality] - [Sharpness] Sharpen the edges of the image to improve legibility. Smoothen the rough con-
tour or sharpen the blurred image.
[Tray Select] Specify the paper tray to make a copy.
[Original > Output] Copy an original onto both sides of paper.
[ID CARD COPY] When you want to copy cards, such as an insurance card, a driver license card
and a business card, you can arrange the front and back sides of the card on
a single page and copy the images on to the same side of one sheet. This can
reduce the number of sheets used.
[Finishing] You can select whether to sort the output sheets or group them when printing
multiple sets of copies.
[Combine] Copy the 1-sided original on both sides of paper, or copy the 2-sided original
on both sides or on a single side of sheets of paper.
[Separate Scan] If the number of original sheets is so large that they cannot be loaded into the
ADF at the same time, you can load them in several batches and handle them
as one job.