Konica Minolta bizhub C3110 - Manual (Page 71)

bizhub C3110 6-11
6.3 Using Fax Functions 6
6.3.2 How to Send
1
Load the original.
2
Press the Fax key.
3
Enter a fax number.
% You can select the desired destination from the pre-registered destination list, or directly enter des-
tination information. For details on how to register a destination, refer to page 6-17.
% Fax broadcasting can be performed by specifying multiple destinations.
4
Specify fax transmission options.
% On the main screen (Fax mode), press the + or , key to select the setting you want to change.
5
Press the Start key.
% If you press the Stop/Reset key while scanning the original, scan processing stops, and the confir-
mation screen appears to check whether you wish to cancel the job. To stop sending, cancel the
job.
Sending starts.