Lenovo THINKSTATION D10 - Manual (Page 28)

Installing a diskette drive or card reader in bay 4
To install a diskette drive or card reader in bay 4:
1. Open the computer cover. See “Opening the cover” on page 12.
2. Remove the front bezel . See “Removing the front bezel” on page 14.
3. Remove the plastic panel in the bezel by squeezing the plastic tabs that secure
the panel on the inside of the bezel.
4. Remove the static shield from the computer chassis.
5. Slide the diskette drive to the locked position. See “Locating components” on
page 8.
6. Connect the flat cable to the new drive.
7. Reinstall the front bezel.
What to do next:
v To work with another option, go to the appropriate section.
v To complete the installation, go to Chapter 4, “Completing the parts
replacement,” on page 39.
Figure 11. Installing a new diskette drive or card reader
20 ThinkStation Hardware Installation and Replacement Guide