Lenovo G530 - Manual (Page 37)

Chapter 2. Using your computer
29
Changing or removing the user password
To change the password, do the following:
1
Select Set User Password, and press the Enter key. The Set User
Password window opens.
2
Choose your user password, which can be from one to eight
alphanumeric characters in any combination. Type the correct
password in the Enter Current Password field. Press Enter key once to
move to the Enter New Password field, then type in a new user
password in.
3
Press the Enter key once to move to the Confirm New Password field.
Retype the password you just entered to verify it.
4
Commit your password to memory, and press the Enter key.
To remove the password, do the following:
1
Select Set User Password, and press the Enter key.
2
Type the correct user password in Enter Current Password, and finally
press the Enter key thrice.
Note :
Make sure Password on boot is set to Enabled if you desire password
protection at power on.