Lenovo ThinkServer TS430 - Manual (Page 50)

Backplane for 2.5-inch hot-swap hard disk drives
This topic provides information to help you locate the connectors on the 2.5-inch hot-swap hard-disk-drive
backplane.
The following illustrations show the connectors on the 2.5-inch hot-swap hard-disk-drive backplane.
Figure 22. Front view of the 2.5-inch hot-swap hard-disk-drive backplane
1 Slot 0 for a 2.5-inch SAS hot-swap hard disk
drive
5 Slot 4 for a 2.5-inch SAS hot-swap hard disk drive
2 Slot 1 for a 2.5-inch SAS hot-swap hard disk
drive
6 Slot 5 for a 2.5-inch SAS hot-swap hard disk drive
3 Slot 2 for a 2.5-inch SAS hot-swap hard disk
drive
7 Slot 6 for a 2.5-inch SAS hot-swap hard disk drive
4 Slot 3 for a 2.5-inch SAS hot-swap hard disk
drive
8 Slot 7 for a 2.5-inch SAS hot-swap hard disk drive
Figure 23. Rear view of the 2.5-inch hot-swap hard-disk-drive backplane
1 8-pin power connector
Used to connect the P5 power connector of the power supply.
38 ThinkServer TS430 User Guide