Lenovo ThinkServer TS430 User Manual

Page 158

Text mode
Original mode

5. Record the cable routing and connection. Then, disconnect the power supply assembly cables from

the system board and all drives. For server models with hot-swap hard disk drives, you also need to
disconnect the power cable(s) from the hot-swap hard-disk-drive backplanes.

6. Release the power supply assembly cables from the cable clips and ties in the chassis.

7. Remove the four screws

at the rear of the chassis that secure the power supply assembly. Then,

push the power supply assembly from the rear until it is released from the metal retaining tab

CPU

MEM

Figure 85. Releasing the non-hot-swap power supply assembly

146

ThinkServer TS430 User Guide