Lenovo ThinkServer TD200 - Manual (Page 103)

4. If you are instructed to return the hot-swap fan, follow all packaging instructions,
and use any packaging materials that are supplied to you for shipping.
Installing a hot-swap fan
Attention:
v Replace a hot-swap fan within 30 seconds of removal.
v To ensure proper cooling and airflow, do not operate the server for more than 2
minutes with the side cover removed.
To install a hot-swap fan, do the following:
1. Touch the static-protective package that contains the hot-swap fan to any
unpainted metal surface on the server; then, remove the fan from the package
and place it on a static-protective surface.
2. Align the fan 1 over the fan slot and lower fan into the slot in the fan cage
assembly.
Chapter 5. Installing optional devices and replacing customer replaceable units 85