Lenovo Secure Managed Client - Manual (Page 11)

Chapter 2. General setup
The following are check lists to help you quickly set up your Secure Managed
Client environment. This is the suggested order in which to set up your
environment.
Networking
__ Step 1. “Infrastructure requirements” on page 5
__ Step 2. “Diskless client architecture” on page 6
__ Step 3. “Active Directory considerations” on page 6
__ Step 4. “iSCSI boot” on page 7
__ Step 5. “Capacity” on page 7
__ Step 6. “Network topology” on page 8
Installing and configuring LANDesk
__ 1. “Prerequisites” on page 13
__ 2. “Installing LANDesk” on page 14
__ 3. “Retrieving the Secure Managed Client Console” on page 13
__ 4. “Starting LANDesk Management Suite” on page 15
__ 5. “Creating a standard base image” on page 16
__ 6. Chapter 7, “Populating a base image,” on page 41
__ 7. “Creating a standard image or single image user image” on page 16
Provisioning the storage array
__ Step 1. “Provisioning the storage array” on page 16
Building a base image
__ 1. Configuring a donor client
__ 2. “Creating Sysprep images” on page 23
__ 3. Create/upload a base image “Creating a standard base image” on page 16
Creating user images
Selecting the type of image you wish to use
__ 1. Select the type of image that you wish to use. Here is a list of the image
types.
v Secure Managed Client standard image
v Single image
v Local cache
© Copyright Lenovo 2009, 20010 3