Lenovo IdeaCentre A530 - Manual (Page 58)

Step 6. Remove the 6 screws that secure the hinge to the chassis 1 , then raise the hinge to remove it
from the chassis. 2
1
2
Step 7. Raise the hinge 1 and slide the rear deco out as shown. 2
1
2
Step 8. Put the head of a flat head screwdriver between the middle frame and the rear cover as shown.
Then using the screwdriver as a lever and the middle frame metal bar as the fulcrum, prise the rear
cover away from the middle frame.
1
L e ve r
Fulcrum
1
Step 9. Working around the edge in an anti-clockwise direction, use your fingers to prise up the rear cover.
The rear cover is pinned into place, use short, sharp movements to prise it up.
2
2
Step 10. Press down the hinge and slide out the rear cover.
52 IdeaCentre A530 All-In-One PC Hardware Maintenance Manual