Lenovo ThinkServer TD340 - Manual (Page 35)

Your server model might have one or two hot-swap redundant power supplies. Each hot-swap redundant
power supply has one power cord connector
1 on the rear of the server. For each hot-swap redundant power
supply, there might be one or two status LEDs on the power supply near the power cord connector. When
the LED is lit in green, it indicates that the hot-swap redundant power supply is working correctly. When the
LED is lit in amber, it indicates that the hot-swap redundant power supply is likely to fail or has failed.
Figure 7. Rear view of the server with hot-swap redundant power supplies
1 Power cord connectors
Used to connect the power cords.
2 Serial connector
Used to attach a device that uses a 9-pin serial connector.
3 USB connectors
Used to attach a USB-compatible device, such as a USB keyboard, mouse, scanner, or printer. If you
have more than six USB devices, you can purchase a USB hub, which you can use to connect additional
USB devices.
Chapter 3 . Product overview 23