Lenovo ThinkVantage (Rescue and Recovery 4.5) - Manual (Page 74)

Table 33. \Rescue and Recovery\Settings\Backup
Policy Setting Description
BackupLocal Enable or disable Backup Local as a selected
destination for backup. Default: Enabled.
BackupSecond Enable or disable Backup Second as a
selected destination for backup. Default:
Disabled.
Notes:
1. If a service partition backup fails due to
insufficient space, manually delete the
failed backup before making another
backup or attempting to restore from the
failed backup.
2. When backing up the service partition to
external media, set the following registry
key before restoring your system with the
Rescue and Recovery program:
HKLM\Software\Lenovo\
Rescue and Recovery\
Settings\Backup\
BackupSPNetwork=1
BackupUSB Enable or disable Backup USB as a selected
destination for backup. Default: Disabled.
Notes:
1. If a service partition backup fails due to
insufficient space, manually delete the
failed backup before making another
backup or attempting to restore from the
failed backup.
2. When backing up the service partition to
external media, set the following registry
key before restoring your system with the
Rescue and Recovery program:
HKLM\Software\Lenovo\
Rescue and Recovery\
Settings\Backup\
BackupSPNetwork=1
BackupNetwork Enable or disable Backup Network as a
selected destination for backup. Default:
Disabled.
Notes:
1. If a service partition backup fails due to
insufficient space, manually delete the
failed backup before making another
backup or attempting to restore from the
failed backup.
2. When backing up the service partition to
external media, set the following registry
key before restoring your system with the
Rescue and Recovery program:
HKLM\Software\Lenovo\
Rescue and Recovery\
Settings\Backup\
BackupSPNetwork=1
68 Rescue and Recovery 4.5 Deployment Guide