Lenovo ThinkVantage (Rescue and Recovery 4.5) - Manual (Page 23)

Table 10. Network settings (continued)
Setting Windows control file keyword Description
Domain administrator DomainAdmin= Sets the domain administrator for the
computer.
Domain administrator password DomainAdminPassword= Sets the domain administrator
password for the computer.
Advanced settings are used to define one or more commands that can be run the first time a user logs
on to his or her system.
Command line interface
The following executable supports a command line interface for the Base Software Administrator program
and is supported under WinPE and the Windows environment:
TBSADMIN.EXE [/DEPLOY [/SILENT] [/BOOTSP=YES|NO]
[/MANIFEST=""] [/PERSONALIZATION=""]]
The following table provides the switches for the Base Software Administrator program.
Table 11. Switches
Switch Description
/DEPLOY Required to trigger a deploy. If /BOOTSP, /MAN or /PER
is also specified, the deploy wizard is not displayed.
/SILENT Suppresses any message boxes for error or successful
completion. (For return codes, the following table.)
/BOOTSP Takes an explicit Y or N value to indicate whether the
service partition should be set active. For example,
/BOOTSP=Y. A value of N allows the adminitrator to
reset the C: partition active again, so recovery doesn’t
automatically occur on next reboot.
The executable returns the following codes:
Table 12. Return codes
Return code Return message
0 Success
1 Unable to access service partition.
2 Error copying manifest file into service partition
3 Error copying personalization file into service partition
4 Error deleting file from service partition
5 Error writing AUTO.TAG file in service partition
6 Error setting service partition active
Backups
The following sections provide customization information for Rescue and Recovery backups.
Chapter 3 . Configurations 17