Lenovo ThinkVantage (Rescue and Recovery 4.5) User Manual
Page 65
The boot manager interface command-line interface is BMGR32. It resides in the directory C:\Program
Files\Common Files\Lenovo\BMGR. The following table presents the switches and their results for BMGR32.
Table 26. BMGR32 parameters
Parameter
Result
/B0
Boot to partition 0 (based on the order in the partition table).
/B1
Boot to partition 1.
/B2
Boot to partition 2.
/B3
Boot to partition 3.
/BS
Boot to the service partition.
/BW
Boot to the Rescue and Recovery protected partition.
/BWIN
Reset request to boot to Predesktop Area. This must be called prior to booting.
/CFGfile
Apply the configuration file parameters. See “RRCMD command-line interface”
on page 53 for details regarding the configuration file.
/DS
Return the Master boot record (MBR) data sector (0-based).
/Dn
Apply changes to disk n, where n is 0-based, (default: disk containing
environment variable “SystemDrive” or “C:\” if “SystemDrive” is not defined.)
/H0
Hide partition 0.
/H1
Hide partition 1.
/H2
Hide partition 2.
/H3
Hide partition 3.
/HS
Hide the service partition.
/P12
Hide the service partition by setting partition type to 12.
/INFO
Display hard disk drive information (checks for 8 free sectors).
/INFOP
Display hard disk drive information (checks for 16 free sectors).
/M0
The Rescue and Recovery environment is located in the service partition.
/M1
The Rescue and Recovery environment is located in the C:\PARTITION (dual
boot Windows and Windows PE).
/M2
The Rescue and Recovery environment is located in the service partition with
DOS (dual boot Windows PE and DOS; Lenovo-branded preload Only).
/OEM
Computer is not a Lenovo-branded computer. This forces a second check for
the F11 (default) key press after POST. This may be required for older systems.
This is also the default setting for the OEM version of the Rescue and Recovery
program.
/Patchn
Used for installation program only to set a variable that the Master boot record
patch program can access.
Patchfilefilename
Used for installation program only to install the Master boot record patch.
/PRTC
Used for installation program only, to retrieve patch return code.
/IBM
System is a Lenovo-branded computer.
/Q
Silent.
/V
Verbose.
/R
Reboot computer.
/REFRESH
Reset partition table entries in data sector.
Appendix A. Administrative tools
59