Kodak 605 - Manual (Page 17)

2-2 April 30, 2007
Operating the Printer
Understanding the Operator Panel Lights
Using Setup Mode to Review Printer Settings
Use the operator panel to review printer settings in Setup mode.
1. Press Menu to enter Setup Mode.
2. Press Menu repeatedly to scroll through the printer settings.
3. Press +/- to scroll through selections.
4. Press Enter to initiate an action or accept a change.
5. Press Clear to exit Setup Mode.
Light Color Printer Status
Power Orange The printer power is on.
Ready Green The printer is ready to make prints.
Error Red An error has occurred. See the message on the operator panel, then see
“Resolving Operator Panel Error Messages” on page 4-2.
Printer settings
are displayed here
3
1,2
4
5