Loading the paper, Loading the paper -8 – Kodak 605 User Manual
Page 13
1-8
April 30, 2007
Setting Up the Printer
Loading the Paper
Make sure that you have a KODAK Photo Print Kit 6800/4R or KODAK Photo
Print Kit 6800/6R available. These kits contain the correct size paper for your
printer. See Appendix A for details on the photo print kits (sold separately).
1.
Make sure that the printer power is on ( | ).
2.
Remove the plastic from the new paper roll.
IMPORTANT:
Do not remove the label from the paper roll until you have
successfully loaded the paper in the printer.
3.
Attach the paper flanges to each end of the paper roll.
a.
Align the lugs on the green paper flange with the notches on the
paper roll.
b.
Insert green paper flange into the notched end of the paper roll.
c.
Insert the black paper flange on the paper roll.
NOTE: Be sure to match the lugs on the green paper flange with the notches
on the left side of the paper roll. If you do not attach the paper flange
correctly, the paper roll will not fit into the printer.
4.
Open the paper door.
Notches
Paper Flange
Paper Flange
Lugs
Paper Door