Kodak DC215 - Manual (Page 8)

2
Preparing to Take Pictures
Before you start taking pictures with your camera, you first need to install
the batteries or connect a Kodak-specified AC adapter for power, and
insert a KODAK Picture Card (camera memory card) into the camera. A
Kodak-specified AC adapter is available as an accessory from a dealer of
Kodak products or from our Website at
http://www.kodak.com/go/accessories
Loading Batteries
Your camera comes with four AA batteries so you can start taking
pictures immediately. For information on guidelines for battery usage, see
page 66.
Turning the Camera On and Off
You turn the camera on and off using the Power switch, located on the
back of the camera.
1 Slide the Battery switch located on the side
of the camera to the right to unlock the
battery tray.
2 Slide the battery tray out of the camera.
3 Insert the batteries as indicated on the
battery tray.
4 Slide the battery tray into the camera until
it locks in place.
q To turn on the camera, slide the Power
switch to the right.
The green ready light next to the
viewfinder, and the Status Display on
top of the camera turn on.
q To turn off the camera, slide the Power
switch again to the right.
I P A G E M
X
T W POWER
Preferences
Connect
Capture
Review