Kodak DC215 - Manual (Page 57)

51
7
Camera
Problem Cause Solution
Ready light does not turn
on and the camera does not
work. Batteries are low or
dead. Batteries need to be
replaced. See page 2.
Camera is not
turned on. Turn on the camera.
See page 2.
Red ready light comes on
and camera does not take a
picture. Batteries are low. Batteries need to be
replaced. See page 2.
Camera memory
card is full Transfer pictures to
your computer,
delete pictures on
the card (see page
34), or insert a card
with available
memory. See page 4.
Amber ready light comes
on. Flash is not charged. Wait for the flash to
charge.
Green ready light is
blinking and camera does
not take a picture Picture is being
processed and saved
to camera memory
card. Wait for the picture
to complete
processing.
SHUTTER button does not
work. Camera is not
turned on. Turn on the camera.
See page 2.
Slider switch is not
set to Capture. Set the Slider switch
to Capture.
Ready light is
blinking. Camera is
processing picture. Wait until Ready
light stops blinking
before attempting to
take another picture.
The Status Display
reads Full. The
camera memory
card is full. Transfer pictures to
your computer,
delete pictures on
the card (see page
34), or insert a card
with available
memory. See page 4.