American Audio Pro Scratch 1 - Manual (Page 25)

BASIC OPERATIONS - FX MIX
FX MIX - BOP CONTROL: This function allows you to engage either the COAST or SKID effects at any
point of a track during normal playback. The effect will play out according to its parameters and then resume
normal playback. The procedure below list the steps to activate the FX Mix - BOP Control. In the following
example we will you the SKID effect.
American DJ
®
AUDIO • Pro Scratch 1™ INSTRUCTION MANUAL • PAGE 25
STEP ONE: Be sure you are in continuous play mode, and a track is playing.
Turn the SKID effect on. By pressing down the SKID/COAST BUTTON (5)
until it begins to glow as in figure 57.
Figure 57
Figure 59
Figure 58
STEP TWO: Select the FX MIX BUTTON (11) to activate the FX Mix Mode as
in figure 58.
STEP THREE: To initiate the FX BOP Function, tap the BOP/ENTER BUTTON
(20). At this point the effects will play out for the length of the SKID value. When the
effect has played out normal playback will resume from the point the effect ended.
You can continue this effect at any time by repeating steps two and three. You must
be in continuos play mode for this effect to operate properly, if the unit is in single
play mode the track will cue when the effect has played out.