Norgren Pneufit C - Manual (Page 4)

09/04 N/US 9 9..1 1..002.04 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
For your local Norgren Technical Sales Centre phone 0345 662266. For your local Norgren Distributor phone 0345 227777.
IMI Norgren Limited, PO Box 22, Eastern Avenue, Lichfield, Staffordshire WS13 6SB
Pneufit C & Pneufit M composite fittings
Inch
Ø 3 ... 10 mm O/D tube
ØD H L C B D
5/32 1.36 (34.6) 0.50 (12.75) 0.13 (3.3) 0.64 (16.3) 0.41 (10.5) C20200200
3/16 1.40 (35.5) 0.59 (15.1) 0.14 (3.5) 0.66 (16.8) 0.45 (11.5) C20200300
1/4 1.45 (36.8) 0.64 (16.3) 0.14 (3.5) 0.69 (17.4) 0.51 (13.0) C20200400
5/16 1.55 (39.4) 0.78 (19.85) 0.17 (4.3) 0.74 (18.7) 0.57 (14.5) C20200500
3/8 1.68 (42.6) 0.85 (21.5) 0.18 (4.5) 0.80 (20.2) 0.69 (17.5) C20200600
1/2 1.93 (48.9) 0.96 (24.5) 0.18 (4.5) 0.87 (22.0) 0.83 (21.0) C20200700
B
H
L D ØD
C
Straight Union
C2020
B2 B1
H
ØE ØF ØB ØA
ØA ØB H B1 B2 ØE ØF
Straight Union
(Unequal)
C2020
3/16 5/32 1.38 (35.0) 0.66 (16.8) 0.64 (16.3) 0.45 (11.5) 0.41 (10.5) C20200302
1/4 5/32 1.40 (35.6) 0.69 (17.4) 0.64 (16.3) 0.51 (13.0) 0.41 (10.5) C20200402
1/4 3/16 1.43 (36.2) 0.69 (17.4) 0.66 (16.8) 0.51 (13.0) 0.45 (11.5) C20200403
5/16 1/4 1.50 (38.1) 0.74 (18.7) 0.69 (17.4) 0.57 (14.5) 0.51 (13.0) C20200504
3/8 1/4 1.56 (39.7) 0.80 (20.2) 0.69 (17.4) 0.69 (17.5) 0.51 (13.0) C20200604
3/8 5/16 1.61 (41.0) 0.80 (20.2) 0.74 (18.7) 0.69 (17.5) 0.57 (14.5) C20200605
1/2 3/8 1.78 (45.3) 0.87 (22.0) 0.80 (20.2) 0.83 (21.0) 0.69 (17.5) C20200706
T
ØD
L
B
A
HEX
ØD T L A B Hex
Straight adaptor
(external + internal hex)
C2425
4 UNF 10/32 0.84 (21.4) 0.14 (3.6) 7/16 C24250210
4 NPT 1/8 0.77 (19.5) 0.33 (8.5) 7/16 C24250218
4 NPT 1/4 0.87 (22.0) 0.41 (10.5) 9/16 C24250228
NPT 3/8 0.90 (22.95) 0.45 (11.5) 11/16 C24250238
4 UNF 10/32 0.87 (22.0) 0.14 (3.6) 7/16 C24250310
6 NPT 1/8 0.91 (23.1) 0.33 (8.5) 7/16 C24250318
6 NPT 1/4 0.91 (23.1) 0.41 (10.5) 9/16 C24250328
6 NPT 3/8 0.95 (24.1) 0.45 (11.5) 11/16 C24250338
6 UNF 10/32 0.91 (23.2) 0.14 (3.6) 1/2 C24250410
8 NPT 1/8 0.94 (23.8) 0.33 (8.5) 1/2 C24250418
8 NPT 1/4 0.91 (23.2) 0.41 (10.5) 9/16 C24250428
8 NPT 3/8 0.95 (24.2) 0.45 (11.5) 11/16 C24250438
NPT 1/2 1.07 (27.3) 0.57 (14.5) 7/8 C24250448
8 NPT 1/8 1.11 (28.2) 0.33 (8.5) 9/16 C24250518
10 NPT 1/4 1.02 (26.0) 0.41 (10.5) 9/16 C24250528
10 NPT 3/8 1.04 (26.5) 0.45 (11.5) 11/16 C24250538
10 NPT 1/2 0.96 (24.5) 0.57 (14.5) 7/8 C24250548
10 NTP 1/8 1.19 (30.1) 0.33 (8.5) 11/16 C24250618
12 NTP 1/4 1.22 (31.1) 0.41 (10.5) 11/16 C24250628
12 NPT 3/8 0.98 (24.8) 0.45 (11.5) 11/16 C24250638
12 NPT 1/2 0.94 (24.0) 0.57 (14.5) 7/8 C24250648
NPT 1/8 1.31 (33.4) 0.33 (8.5) 7/8 C24250718
16 NPT 1/4 1.39 (35.4) 0.41 (10.5) 7/8 C24250728
16 NPT 3/8 1.26 (31.9) 0.45 (11.5) 7/8 C24250738
16 NPT 1/2 1.24 (31.4) 0.57 (14.5) 7/8 C24250748
5/32
3/16
1/4
5/16
3/8
1/2
0.64
(16.2)
0.66
(16.8)
0.68
(17.3)
0.72
(18.2)
0.78
(19.9)
0.91
(23.0)
Method of assembly
Impact resistant PBT body in black for
Pneufit
® C and light gray for Pneufit ® M.
Release buttons are red for metric, grey
for inch, and light grey oval for Pneufit
® M.
Stainless steel grab ring with special
design to retain softer tube and provide
easy releasability.
Silicon free U-packing provides leak tight
tube seal under side loading. 4
3
2
1 Stem seal provides leak tight 360°
swivel connection.
Nickel plated brass threads and notches
on hex to signify NPT.
Pre-applied thread sealant on tapered
threads and recessed captive O-ring on
parallel threads. 7
6
5
1
2
3
5
6
7
4
1. Ensure that the end
tube is cut square and
is free from burrs.
2. Push the tube throughthe
release ring button and
grab ring into the fitting.
3. Push the tube firmly through
the 'O' ring until it bottoms on
the tube stop, then pull back.
4. To disconnect, push the tube into
the fitting, hold down the release
button and withdraw the tube.