Norgren Pneufit C - Manual

Pneufit C composite and
Pneufit M fittings
Inch
Ø 1/8” ... 1/2” O/D tube
09/04 N/US 9 9..1 1..002.01 Our policy is one of continued research and development. We therefore reserve the right to amend, without notice, the specifications given in this document.
For your local Norgren Technical Sales Centre phone 0345 662266. For your local Norgren Distributor phone 0345 227777.
IMI Norgren Limited, PO Box 22, Eastern Avenue, Lichfield, Staffordshire WS13 6SB
Tube sizes
Standard sizes: 5/32", 3/16", 1/4", 5/16", 3/8"
and 1/2"
Minature sizes: 1/8", 5/32” (1/4 " from Dec 2003)
Thread sizes
Standard sizes: 10-32 UNF, 1/8", 1/4", 3/8" and
1/2" NPT and ISO R
Minature sizes: 10-32 UNF, 1/16" and 1/8" NPT
Tube types
Nylon 11 or 12
Polyurethane 85 or 95 durometer
Norgren Pneufit ® C fittings are ready to use, offering fast
assembly with no need for tools providing optimum flow.
Pneufit ® C offers a broad range of over 1,000 composite push-
in pneumatic fittings to complement our established all brass
Pneufit
® series.
Releasable stainless-steel grab-ring to grip nylon or
polyurethane tube (85 or 95 durometer).
Nickel plated brass components provide corrosion and
contamination resistance and an extended life.
Pre applied thread sealant on all taper threads and recessed
captive O-ring on parallel threads provides optimum rapid
sealing.
Internal and external hexagons on straight fittings.
Immediate quality sealing using silicone free U-packing.
Mounting holes on all union fittings.
Also introducing Miniature Pneufit M an ultra compact
alternative where space is at a premium.
Technical data
Medium: Compressed air
Operating pressure: 29.5" Hg vacum up to 150 psi
Temperature: 32°F to 140°F
Materials
Body: PBT
Seals: NBR (silicone free) u-packaging and O-rings
Threaded bodies: nickel plated brass
Release sleeve and backing ring: POM
Grab-ring: stainless steel
Collar: nickel plated brass
Thread sealant: threebond 2350B