Norgren 5040 Series - Manual (Page 2)

5040-311-01C
5040-211-01C 5040-111-01C
4.125
5.807
1.820
5.167
3°
REF
2 x 3/8-18 NPTF8 1/8-27 NPTF
2 x 1/2-14 NPTF
1.962
1.638
“A” SIDE GAGE
PORT LOCATION
1/8-27 NPTF
2.507
0.975
2.023
ø .56
1.5
3.0
4.614
1.712
3.600
VENT 1/2-14 NPT
5.167
REF
2.507 REF
3° REF
5.807 REF
1/8-27
NPTF
MACHINE CRIMPED
METRI-PACK
150 SERIES CONNECTOR
PACKARD P/N 12052644
2X 3/8-18 NPTF
1/8-27 NPTF
0.975
2.023
2X 1/2-14
NPTF
1.638 1.963 1.712
1.5 REF
3.0 REF
4.125
Ø 0.56
4.600
REF
3.600
VENT
1/2-14
NPTF
5.167
REF
3°
REF
2X 3/8-18 NPTF
1/8-27 NPTF
5.807
2.023 2.507 REF
0.975
1.638 1.963
1.5 REF
3.0 REF
Ø 0.56
1/8-27 NPTF
2X 1/2-14 NPTF
1/2-14 NPTF
VENT
4.614
REF
1.712
3.600 4.125
MACHINE CRIMPED
METRI-PACK
150 SERIES CONNECTOR
PACKARD P/N 12052644
Warning
Improper selection, misuse, age
or malfunction of components
used in commercial vehicle
systems can cause failure in
various modes. The system
designer is warned to consider
the failure modes of all
component parts used in
commercial vehicle systems and
to provide adequate safeguards
to prevent personal injury
or damage to equipment or
property in the event of such
failure modes. System designers
and end users are cautioned to
consult instruction sheets and
specifications available from the
factory. The system designer/end
user is responsible for verifying
that all requirements for the
application are met.
Warranty
The products described herein
are warranted subject to seller’s
Standard Terms and Condition of
Sale, available at seller’s website.
Our policy is one of continued research and development. We therefore reserve the right to amend,
without notice, the specifications given in this document.
© Norgren GT Development Corporaton, 2014
REV: 8/14
Lift Axle Control Module 5040 Series
02
Dimensions (Inches)