beautypg.com

Norgren P72F Series Datasheets User Manual

P72f

background image

See Section ALE-24 for Accessories

Littleton, CO USA

Phone 303-794-2611

www.norgren.com

P72F

Excelon design allows in-line or modular installation

Controls increase of downstream pressure on
start up. Cylinders and other air operated devices are
eased into normal operating positions, reducing the
possibility of equipment damage and hazards to the
user.

3 port/2 position, normally closed, soft start valve

Blocks inlet air and exhausts downstream air when
pilot signal is removed

Solenoid pilot or air pilot operation

Designed primarily for use in start-up and shutdown
of equipment, not as a frequently cycling directional
control valve. Norgren offers a wide variety of valves
designed for frequent cycling and other applications.
Please refer to the P72C and P74C valves, and to
other Norgren valve catalogs.

Excelon 72 Smooth Start/Exhaust Valve

1/4", 3/8" Port Sizes

ALE-17-6

ISO Symbols

Solenoid operated

Air pilot

Ordering Information.

Models listed are with PTF threads. Solenoid operated models include 24 VDC coil and plug without indicator.

* To select other solenoid type and coil voltage refer to alternative models table below.

Port Size

Solenoid Operated*

Weight

Air Pilot Operated

Weight

Model

lb (kg)

Model

lb (kg)

1/4"

P72F-2AC-PFA

2.00 (0.91)

P72F-2AA-NNN

1.93 (0.88)

3/8"

P72F-3AC-PFA

1.98 (0.90)

P72F-3AA-NNN

1.91 (0.87)

P 7 2

-

F

★ ★

-

Solenoid Manual Operator

Substitute

Shrouded push button

P

None

N

Connectors

Substitute

3 pin plug with cable gland,

A

no indicator
Without

N

** to order air pilot models also substitute ‘NNN’ at

digits 8, 9 and 10 e.g. P72F-2GA-NNN.

Alternative Models

Coil Voltage

Nominal

Substitute

Power Rating

24 V d.c.

2 W

F

12 V d.c.

2 W

E

6 V d.c.

2 W

D

220/240 V

4/2.5 VA

B

50/60 Hz
110/120 V

4/2.5 VA

A

50/60 Hz
No coil

2 W

Z

No solenoid

N

Operator

Substitute

Air pilot**

A

22 mm miniature solenoid

C

CNOMO

L

Threads

Substitute

PTF

A

ISO Rc taper

B

ISO G parallel

G

Port Size

Substitute

1/4"

2

3/8"

3