Norgren R22 Series Datasheets - Manual (Page 2)

ALE-16-7
All Dimensions in Inches (mm)
Littleton, CO USA Phone 303-794-2611 www.norgren.com
R22 Stainless Steel Regulators
Technical Data
Fluid: Compressed air
Maximum pressure: 290 psig (20 bar)
Operating temperature: -4° to 175°F (-20° to 80°C) *
* Air supply must be dry enough to avoid ice formation at temperatures below 35°F
(2°C).
Typical flow with 150 psig (10 bar) inlet pressure, 90 psig (6.3 bar) set
pressure and a droop of 15 psig (1 bar) from set: 106 scfm (50 dm 3 /s)
Gauge ports:
1/4 PTF
Materials
Body: Stainless steel
Bonnet: Stainless steel
Adjusting screw: Stainless steel
Elastomers: Synthetic rubber
Typical Performance Characteristics
INLET PRESSURE - 150 psig (10 bar g)
FLOW CHARACTERISTICS - PORT SIZE: 1/2"
0 20 40 60 80 100 dm 3 /s
AIR FLOW
0 40 80 120 160 200 240 scfm
OUTLET PRESSURE
8
6
4
2
0
bar g
100
80
60
40
20
0
psig
Panel mounting hole diameter: 1.65" (42 mm)
Maximum Panel thickness: 0.37" (9.5 mm)
∅ 1.57 (40)
7.32 (186)
3.19 (81) max
1.34 (34) 1.14 (29)
2.28 (58)
3.50 (89)
Standard Service Kits
Type Part number
Relieving R22-100R
Non relieving R22-100NR
Viton relieving 5550-26
Viton non relieving 5550-29
Service kits includes diaphragm assembly, o-ring, valve, valve
spring.