Norgren L22 Series Datasheets - Manual (Page 2)

L22 Stainless Steel Lubricator
Littleton, CO USA Phone 303-794-2611 www.norgren.com ALE-16-15
All Dimensions in Inches (mm)
Typical Performance Characteristics T echnical Data
Fluid: Compressed air
Maximum pressure: 250 psig (17 bar)
Operating temperature: -4° to 175°F (-20° to 80°C)*
* Air supply must be dry enough to avoid ice formation at temperatures
below 35°F (2°C ).
Start point (i.e. minimum flow required for lubricator operation) at 90 psig (6.3 bar)
inlet pressure:
3.5 scfm (1.7 dm
3 /s)
Typical flow with 90 psig (6.3 bar) inlet pressure and
7 psig (0.5 bar) pressure drop:
102 scfm (48 dm
3 /s)
Nominal bowl size:
7 fluid ounce (0.2 liter)
Manual drain connection: Will fit 1/8-27 and 1/8-28 pipe thread
Recommended lubricants: See Section ALE-29.
Materials:
Body: Stainless steel
Bowl: Stainless steel
Elastomers: Synthetic rubber
6.73 (171)
8.00 (203)**
1.34 (34)
1.14 (38)
1.50 (
∅
76)
3.90 (99)
2.76 (70)
** Minimum clearance required to remove bowl.
Service Kits
Item Part number
Service kit L22-100A
Service kits includes all seals, check valve ball and spring, sight
dome and filter plug assemblies.
INLET PRESSURE: psig (bar g)
FLOW CHARACTERISTICS
0 10 20 30 40 50 dm 3 /s
AIR FLOW
0 20 40 60 80 100 120 scfm
PRESSURE DROP
0.8
0.6
0.4
0.2
0
bar d
10
8
6
4
2
0
psid
36
(2.5)
58
(4.0)
91
(6.3)
116
(8.0)
150
(10.0)