Nen series nfpa aluminum cylinders – Norgren NEN Series NFPA Aluminum Cylinders User Manual
Page 6
NEN Series NFPA Aluminum Cylinders
All Dimensions in Inches (mm)
1/08
N/US 1.5.507.6
Our policy is one of continuous research and development.
We reserve the right to amend, without notice, the specifications given in this document.
www.norgren.com
WARNING
These products are intended for use in industrial compressed air systems only. Do not use these
products where pressures and temperatures can exceed those listed under TTeecchhnniiccaall D
Daattaa.
Before using these products with fluids other than those specified for non-industrial
applications, life-support systems, or other applications not within published specifications,
consult Norgren.
Through misuse, age, or malfunction, components used in fluid power systems can fail in
various modes.
The system designer is warned to consider the failure mode of all component parts used in fluid
power systems and to provide adequate safeguards to prevent personal injury or damage to
equipment in the event of such failure.
System designers must provide a warning to end users in the system instructional
manual if protection against a failure mode cannot be adequately provided.
System designers and end users are cautioned to review specific warnings found in instruction
sheets packed and shipped with these products.
F
øCD
ER
LR
CB
CW
CW
FL
D
G
DD
MP2 Mount kit - MK - NEN - MP2
MX1 Mount kit - MK-NEN-MX1
MX2/MX3 Mount kit-MK-NEN-MX2
MP1 Mount kit - MK-NEN-MP1
FL
F
øCD
MR
CB
CW
CW
LR
D
G
DD
EB (eye bracket)
P (pin)
F
FL
E
CB
øDD
4 Places
BA
BA
E
LR Radius
øCD
M Radius
øCD
LP
LH
E
Kit number
CD
FL
F
B
CW
D
MR
G
LR
DD
MK-NENC-MP1
0.502
0.75
0.38
0.76
0.50
2.00
0.62
1.43
0.62
0.28
MK-NEND-MP1 0.502
0.75
0.38
0.76
0.50
2.50
0.62
1.84
0.62
0.34
MK-NENE-MP1
0.502
0.75
0.38
0.76
0.50
3.00
0.62
2.19
0.62
0.34
MK-NENF-MP1
0.752
1.25
0.63
1.26
0.62
3.75
0.87
2.77
0.87
0.41
MK-NENG-MP1 0.752
1.25
0.63
1.26
0.62
4.50
0.87
3.32
0.87
0.41
Kit number
CD
FL
F
B
CW
D
ER
G
DD
MK-NENC-MP2
0.502
1.13
0.38
0.76
0.50
2.00
0.62
1.43
0.28
MK-NEND-MP2 0.502
1.13
0.38
0.76
0.50
2.50
0.62
1.84
0.34
MK-NENE-MP2
0.502
1.13
0.38
0.76
0.50
3.00
0.62
2.19
0.34
MK-NENF-MP2
0.752
1.88
0.63
1.26
0.62
3.75
0.87
2.77
0.41
MK-NENG-MP2 0.752
1.88
0.63
1.26
0.62
4.50
0.87
3.32
0.41
NFPA Eye Bracket
NENC-EB
NENF-EB
BA
1.625
2.563
CB
0.750
1.250
CD
0.500
0.750
DD
0.406
0.531
E
2.500
3.500
F
0.375
0.625
FL
1.125
1.875
LR
0.750
1.250
M
0.500
0.750
NFPA Pin NEN-5
NEN-7
CD
0.500
0.750
E
0.109
0.125
LH
2.094
2.875
LP
1.875
2.625
MX1 Mount Kit-MK-NEN-MX1
Tie Rod extended Both Ends
Kit number
DD
A
B
MK-NENC-MX1
1/4-28
1.375
1.375
MK-NEND-MX1
5/16-24
1.500
1.500
MK-NENE-MX1
5/16-24
1.500
1.500
MK-NENF-MX1
3/8-24
1.812
1.937
MK-NENG-MX1
3/8-24
1.812
1.937
MX2 Mount Kit-MK-NEN-MX2
Tie Rod Extended Cap End
Kit number
DD
A
B
MK-NENC-MX2
1/4-28
N/A
1.375
MK-NEND-MX2
5/16-24
N/A
1.500
MK-NENE-MX2
5/16-24
N/A
1.500
MK-NENF-MX2
3/8-24
N/A
1.937
MK-NENG-MX2
3/8-24
N/A
1.937
MX3 Mount Kit-MK-NEN-MX3
Tie Rod Extended Head End
Kit number
DD
A
B
MK-NENC-MX2
1/4-28
1.375
N/A
MK-NEND-MX2
5/16-24
1.500
N/A
MK-NENE-MX2
5/16-24
1.500
N/A
MK-NENF-MX2
3/8-24
1.812
N/A
MK-NENG-MX2
3/8-24
1.812
N/A
All dimensions ± .015 unless otherwise noted.
MP1 and MP2 kits come complete with mounting hardware, pivot pin and retaining clips.
A
DD
B
DD