beautypg.com

MSI MS-91C2 Series User Manual

Page 18

background image

2-6

MS-91C2 Server Board

9. Align the holes on the mainboard with

the heatsink. Push down the cooler
until its four clips get wedged into
the holes of the mainboard.

10. Turn over the mainboard to confirm

that the c lip-ends are c orrectly
inserted.

Mainboard

Hook

Important

1. Read the CPU status in BIOS.
2. Whenever CPU is not installed, always protect your CPU socket pin with the

plastic cap covered (shown in Figure 1) to avoid damaging.

3. Mainboard photos shown in this section are for demonstration of the CPU/

cooler installation only. The appearance of your mainboard may vary depend-
ing on the model you purchase.

PDF created with pdfFactory Pro trial version

www.pdffactory.com