Cirrus Logic CDB5532U - Manual (Page 10)

CDB5532U
10 DS807DB1
2.2.3 Data Collection Window
The Data Collection window (Figure 5) allows the user to collect sample sets of data from the CS5532 and
analyze them using time domain, FFT, and histogram plots. The Data Collection window is accessible
through the Window menu, or by pressing .
Figure 5. CDB5532U Data Collection Window
Time Domain / FFT / Histogram Selector: This menu selects the type of data processing to perform on
the collected data and display in the plot area. Refer to the section ‘Analyzing Data” on page 12 for more
information.
Collect Button: This button will collect data from the part, to be analyzed in the plot area. See the section
‘Collecting Data Sets” on page 12 for more information.
Config Button: This button will bring up the Configuration window, in which the user can modify the data
collection specifications. See the discussion of the Configuration window in this document.
Output Button: This button will bring up a window in which the user can output the data to a data file for
later use, print out a plot, or print out the entire screen.
Zoom Button: This button allows the user to zoom in on the plot by selecting two points in the plot area.
Click the Restore button to return to the normal data plot, or press the Zoom button again to zoom in even
further.
Setup Select Box: This box determines the setup number to use when performing conversions. See the
CS5532 datasheet for more details on the functionality of the channel setup registers.