Cirrus Logic CS5529 - Manual (Page 7)

CS5529
DS246F5 7
ABSOLUTE MAXIMUM RATINGS
(DGND = 0 V) (See Note 13.)
Notes: 13. All voltages with respect to ground.
14. VA+ and VA- must satisfy {(VA+) - (VA-)}
≤ +6.3 V; and |VA-| must be ≤ VA+.
15. VD+ and VA- must satisfy {(VD+) - (VA-)}
≤ +7.75 V.
16. Applies to all pins including continuous overvoltage conditions at the analog input (AIN) pins.
17. Transient current of up to 100mA will not cause SCR latch-up. Maximum input current for a power
supply pin is ±50 mA.
18. Total power dissipation, including all input currents and output currents.
WARNING: Operation at or beyond these limits may result in permanent damage to the device.
Normal operation is not guaranteed at these extremes.
Parameter Symbol Min Typ Max Unit
DC Power Supplies (Notes 14 and 15)
Positive Digital
Positive Analog
Negative Analog
VD+
VA+
VA-
-0.3
-0.3
-6.0 -
-
- +6.0
+6.0
+0.3 V
V
V
Input Current, Any Pin Except Supplies (Notes 16 and 17) I
IN
- - ±10 mA
Output Current I
OUT
- - ±25 mA
Power Dissipation (Note 18) PDN - - 8 mW
Analog Input Voltage AIN and VREF pins V
INA
(VA-) + (-0.3) - (VA+)+0.3 V
Digital Input Voltage V
IND
-0.3 - (VD+)+0.3 V
Ambient Operating Temperature T
A
-40 - +85 °C
Storage Temperature T
stg
-65 - +150 °C