Cirrus Logic CS5464 - Manual (Page 7)

CS5464
DS682F3 7
3. CHARACTERISTICS & SPECIFICATIONS
RECOMMENDED OPERATING CONDITIONS
ANALOG CHARACTERISTICS
• Min / Max characteristics and specifications are guaranteed over all Recommended Operating Conditions .
• Typical characteristics and specifications are measured at nominal supply voltages and TA = 25 °C.
• VA+ = VD+ = 5 V ±5%; AGND = DGND = 0 V; VREFIN = +2.5 V. All voltages with respect to 0 V.
• DCLK = 4.096 MHz.
Notes: 1. Applies when the HPF option is enabled.
2. Applies when the line frequency is equal to the product of the output word rate (OWR) and the value of
Epsilon.
Parameter Symbol Min Typ Max Unit
Positive Digital Power Supply VD+ 3.135 5.0 5.25 V
Positive Analog Power Supply VA+ 4.75 5.0 5.25 V
Voltage Reference VREFIN - 2.5 - V
Specified Temperature Range T
A
-40 - +85 °C
Parameter Symbol Min Typ Max Unit
Accuracy
Active Power All Gain Ranges
(Note 1) Input Range 0.1% - 100%
P
Active
- ±0.1 - %
Reactive Power All Gain Ranges
(Note 1 and 2) Input Range 0.1% - 100%
Q
Avg
- ±0.2 - %
Power Factor All Gain Ranges
(Note 1 and 2) Input Range 1.0% - 100%
Input Range 0.1% - 1.0%
PF -
- ±0.2
±0.27
-
- %
%
Current RMS All Gain Ranges
(Note 1) Input Range 1.0% - 100%
Input Range 0.1% - 1.0%
I
RMS
-
- ±0.1
±0.17
-
-
%
%
%
Voltage RMS All Gain Ranges
(Note 1) Input Range 5% - 100%
V
RMS
- ±0.1 - %
Analog Inputs (All Inputs)
Common Mode Rejection (DC, 50, 60 Hz) CMRR 80 - - dB
Common Mode + Signal -0.25 - VA+ V
Analog Inputs (Current Inputs)
Differential Input Range (Gain = 10)
[(IIN+) – (IIN-)] (Gain = 50)
IIN
-
- 500
100 -
- mV
P-P
mV
P-P
Total Harmonic Distortion (Gain = 50) THD 80 94 - dB
Crosstalk from Voltage Input at Full Scale (50, 60 Hz) - -115 - dB
Input Capacitance IC - 27 - pF
Effective Input Impedance EII 30 - - k

Noise (Referred to Input) (Gain = 10)
(Gain = 50)
N
I
-
- -
- 22.5
4.5
µV
rms
µV
rms
Offset Drift (Without the High-pass Filter) OD - 4.0 - µV/°C
Gain Error (Note 3) GE - ±0.4 %