Cirrus Logic CDB5463U - Manual (Page 17)

CDB5463U
DS805DB2 17
2.6.3 Standby / Sleep Mode Buttons
When these buttons are pressed, the CS5463 will enter either standby or sleep power saving modes. To
return to normal mode, press the Power Up button.
2.6.4 Power Up Button
This button is used to send the Power Up/Halt command to the CS5463. The part will return to normal
operating mode and halt any conversions that are being done at this time.
2.6.5 Temperature Settings Window
The Temperature Settings Window is used to adjust the temperature offset register (Toffset) and temper-
ature gain register (Tgain) to convert the temperature register (T) from a Celsius scale (°C) to a Fahrenheit
scale (°F) or vice versa and to improve temperature measurement accuracy. Refer to the CS5463 data
sheet for the details of the on-chip temperature sensor.
2.6.6 Write Data to File Window
This window provides a means to write the conversion result data to a .txt text file for later analysis or
print out. The file path and name will be shown in Filename field. The Open File button is used to open a
new or existing .txt text file for data writing. Each time the Write Data button is pressed, the result data is
written into the file and the Number of Lines Written field value will be increased by 1.