RADWAG PUE C/31H/Z Indicator User Manual
User manual, For indicators pue c/31 series
This manual is related to the following products:
Table of contents
Document Outline
- 1. INTENDED USE
- 2. PRECAUTIONS
- 3. WARRANTY CONDITIONS
- 4. MAIN DIMENSIONS
- 5. GETTING STARTED
- 6. KEYPAD
- 7. KEYS’ FUNCTIONS
- 8. INSCRIPTIONS ON THE DISPLAY
- 9. USER MENU
- 10. WEIGHING
- 11. MAIN PARAMETERS
- 12. RS 232 PARAMETERS
- 13. OTHER PARAMETERS
- 14. WORK MODES
- 14.1. Setting accessibility of operation modes
- 14.2. Selecting quantity of operation modes
- 14.3. Counting pieces of the same mass
- 14.4. +/- control referring to the inscribed standard mass
- 14.5. Control of % deviation referring to the inscribed standard mass
- 14.6. Automatic tare
- 14.7. Measurement max force on the pan – latch
- 14.8. Totalizing
- 14.9. Weighing animals
- 14.10. Tare memory
- 15. USER CALIBRATION
- 16. COOPERATION WITH PRINTER
- 17. COOPERATION WITH COMPUTER
- 18. COMMUNICATION PROTOCOL
- 18.1. General information
- 18.2. A set of commands for RS interfaces
- 18.3. Respond message format
- 18.4. Command’s description
- 18.4.1. Zeroing
- 18.4.2. Tarring
- 18.4.3. Get tare value
- 18.4.4. Send the stable result in basic unit
- 18.4.5. Send the result immediately in basic unit
- 18.4.6. Send the stable result in current unit
- 18.4.7. Send the result immediately in current unit
- 18.4.8. Switch on continuous transmission in basic unit
- 18.4.9. Switch off continuous transmission in basic unit
- 18.4.10. Switch on continuous transmission in current unit
- 18.4.11. Switch off continuous transmission in current unit
- 18.4.12. Send all implemented commands
- 18.5. Manual printouts / automatic printouts
- 18.6. Continuous transmission
- 18.7. Configuring printouts
- 19. ERROR COMMANDS
- 20. TROUBLE SHOOTING
- 21. TECHNICAL PARAMETERS
- 22. ADDITIONAL EQUIPMENT