RADWAG PUE C/31H/Z Indicator - Manual (Page 17)

10.4. Weighings in two ranges
Switching between the I range and the II range happens automatically
(exceeding Max of the I range). Weighings in the second range is
signalled by a pictogram in the top left corner of the display.
Then weighings is done with the accuracy of the II range to the moment
of returning to zero (autozero range
) where the scale switches back
to the I range.
10.5. Selection of basic weight unit
This function is used to set weight unit the scale will start with.
Procedure:
• Enter the submenu and then:
• press , until the expected unit appears on the display:
- 17 -