RADWAG PUE C/31H/Z Indicator - Manual (Page 47)

• Load an animal to the platform,
• After exceeding the -LO- value (see 12.2), program starts
the weighings process. The appearance of subsequent
hyphens < - - - - - - - > showing the progress,
• After completing the process of weighings the result is latched
on the display and additionally the OK pictogram is shown in
the upper part of the display:
• You can start the procedure of weighing animals again
by pressing ,
• After removing the animal from the platform program returns
to the window:
Return to weighing:
•
Press .
14.10. Tare memory
Users are allowed to Enter Up to 9 tare values to the memory.
14.10.1. Entering the tare value to the scale memory
Procedure:
• Enter
to function:
- 47 -