RADWAG PUE C/31H/Z Indicator - Manual (Page 49)

Return to weighing:
•
Press .
14.10.2. Selecting a tare value from the memory
• Enter
function according to the ch. 14.10.1 of the manual,
• The program goes to displaying the first value from the selection
of tare values (press to chose different values):
• To use an entered tare value press , you will see the tare value
on the display preceded by the „-„ sign and the Net pictogram:
Caution:
A tare value from the memory is not remembered after powering
off and on the scale.
15. USER CALIBRATION
Only for non-verified scales
Confirmation of high accuracy of weighing requires periodical correcting
of calibration factors in the scale memory – this is adjustment of the scale.
Calibration should be performed when we start weighing or dynamic
change of temperature occurs. Before starting calibration remove
loads from the pan.
- 49 -