RADWAG WTB 2000 Precision Balance User Manual
User manual, Precisions scales – wtb series
This manual is related to the following products:
Table of contents
Document Outline
- 1. INTENDET USE
- 2. PRECAUTIONS
- 3. WARRANTY CONDITIONS
- 4. MAIN DIMENSIONS
- 5. UNPACKING AND ASSEMBLY
- 6. GETTING STARTED
- 7. BALANCE LEVELLING
- 8. KEYPAD
- 9. KEYS’ FUNCTIONS
- 10. INSCRIPTIONS ON THE DISPLAY
- 11. USER MENU
- 12. WEIGHING
- 13. MAIN PARAMETERS
- 14. RS 232 PARAMETERS
- 15. OTHER PARAMETERS
- 16. OPERATION MODES
- 16.1. Setting accessibility of operation modes
- 16.2. Selecting quantity of operation modes
- 16.3. Counting pieces of the same mass
- 16.4. +/- control referring to the inscribed standard mass
- 16.5. Control of % deviation referring to the inscribed standard mass
- 16.6. Automatic tare
- 16.7. Measurement max force on the pan – latch
- 16.8. Totalizing
- 16.9. Weighing animals
- 16.10. Tare memory
- 17. USER CALIBRATION
- 18. COOPERATION WITH PRINTER
- 19. COOPERATION WITH COMPUTER
- 20. COMMUNICATION PROTOCOL
- 20.1. General information
- 20.2. A set of commands for RS interfaces
- 20.3. Respond message format
- 20.4. Command’s description
- 20.4.1. Zeroing
- 20.4.2. Tarring
- 20.4.3. Get tare value
- 20.4.4. Send the stable result in basic unit
- 20.4.5. Send the result immediately in basic unit
- 20.4.6. Send the stable result in current unit
- 20.4.7. Send the result immediately in current unit
- 20.4.8. Switch on continuous transmission in basic unit
- 20.4.9. Switch off continuous transmission in basic unit
- 20.4.10. Switch on continuous transmission in current unit
- 20.4.11. Switch off continuous transmission in current unit
- 20.4.12. Send all implemented commands
- 20.5. Manual printouts / automatic printouts
- 20.6. Continuous transmission
- 20.7. Configuring printouts
- 21. ERROR COMMANDS
- 22. TROUBLE SHOOTING
- 23. TECHNICAL PARAMETERS
- 24. ADDITIONAL EQUIPMENT