RADWAG WTB 2000 Precision Balance - Manual (Page 52)

• Place the required weight on the pan,
• Calibration process starts automatically after placing the adequate
weight that is signalled by the following message:
• The completion of the calibration procedure is signalled by the
following message:
• Take off the weight from the pan, the message is displayed
for 1s and the program returns to the calibration submenu:
• Calibration process can be terminated anytime by pressing
which is signalled by the following message on the display:
• Return to weighing with saving changes that have been made.
Caution:
If the calibration process (span adjustment) lasts longer than 15 the
message will be displayed and short audible signal will be
emitted. Press to perform calibration again with more stable
ambient conditions!
- 52 -