RADWAG WTB 2000 Precision Balance - Manual (Page 28)

15. OTHER PARAMETERS
The user can set parameters which influence the scale operation.
They are gathered in the submenu e.g. backlight and beep
signal. Enter this submenu according to chapter 11.2.
15.1. Backlight function
Program recognises the way the scale is supplied (mains, battery)
and automatically selects the way of operating on the backlight:
bl – for mains
blbt – for batteries or rechargeable battery pack
15.1.1. Backlight for supplying from mains
Procedure:
• Enter the submenu and then:
bL no - backlight switched off
bL YES - backlight switched on
bL Auto - backlight switched off automatically if indication
becomes stable for about 10s
- 28 -