WIKA PGS23.160 - Manual (Page 4)

WIKA operating instructions pressure gauge model PGS with reed contacts
GB
4
14000322.01 03/2011 GB/D/F/E
1. General information
1. General information
■ The pressure gauge described in the operating instructions has been
designed and manufactured using state-of-the-art technology.
All components are subject to stringent quality and environmental
criteria during production. Our management systems are certified to
ISO 9001 and ISO 14001.
■ These operating instructions contain important information on
handling the pressure gauge. Working safely requires that all safety
instructions and work instructions are observed.
■ Observe the relevant local accident prevention regulations and
general safety regulations for the pressure gauge's range of use.
■ The operating instructions are part of the product and must be kept
in the immediate vicinity of the pressure gauge and readily accessi-
ble to skilled personnel at any time.
■ Skilled personnel must have carefully read and understood the
operating instructions prior to beginning any work.
■ The manufacturer's liability is void in the case of any damage caused
by using the product contrary to its intended use, non-compliance
with these operating instructions, assignment of insufficiently quali-
fied skilled personnel or unauthorised modifications to the pressure
gauge.
■ The general terms and conditions contained in the sales documenta-
tion shall apply.
■ Subject to technical modifications.
■ Further information:
- Internet address: www.wika.de / www.wika.com
- Application consultant: Tel.: (+49) 9372/132-0
Fax: (+49) 9372/132-406
E-Mail: [email protected]