WIKA DPS40 - Manual (Page 5)

GB
WIKA operating instructions DELTA-plus, DELTA-comb and DELTA-switch 5
14093265.01 03/2014 GB/D/F/E
1. General information / 2. Safety
2. Safety
WARNING!
Before installation, commissioning and operation, ensure that
the appropriate differential pressure gauge has been selected
in terms of measuring range, design and specific measuring
conditions.
Check the compatibility with the medium of the materials
subjected to pressure!
In order to guarantee the measuring accuracy and long-term
stability specified, the corresponding load limits must be
observed.
Only work on the gauge with the voltage disconnected.
Non-observance can result in serious injury and/or damage to
the equipment.
Further important safety instructions can be found in the
individual chapters of these operating instructions.
2.1 Intended use
The differential pressure gauges of the DELTA-line product family are primarily
used for the monitoring and control of low differential pressures where there are
high requirements in terms of one-sided overpressure and static pressure.
Typical markets for these products are the shipbuilding industry, process heating
technology, the heating, ventilation and air-conditioning industries, the water/
wastewater industry, and machine building and plant construction. For these, the
main function of the measuring instruments is the monitoring and control of filters,
compressors and pumps.
The instrument has been designed and built solely for the intended use described
here, and may only be used accordingly.
The manufacturer shall not be liable for claims of any type based on operation
contrary to the intended use.