WIKA 851.02.100 - Manual (Page 10)

WIKA Operating instructions DELTA-plus, DELTA-comb and DELTA-switch 10
308
15 07/
009 GB/D/F
GB
7.3 Front flange for panel mounting
8. Storage
Before installation, in order to prevent damage from the pressure gauges, follow
the subsequent points:
The pressure gauge should remain in its original packing until installation
After taking out the pressure gauge (e.g. for tests) reuse the original
packaging material
Storage temperature should not exceed -0 °C ... +60 °C
Pressure gauges should be protected against dust and humidity
9. Maintenance and servicing / cleaning
These WIKA differential pressure gauges will give very long service when
handled and operated properly. Control and safety devices are to be checked
for their efficiency (see also VDI 3033 Table1).
The instruments should be cleaned with a damp cloth, moistened with soap
solution. The residual pressure medium in dismounted pressure gauges may be
hazardous or toxic. This should be considered when handling and storing the
removed pressure gauges.
10. Repairs
Repairs should only be carried out by the manufacturer or appropriately trained
personnel. For further technical details see WIKA data sheet PM 07.15,
PV 7.16 or PV 7.17.
11. Disposal
Dispose of instrument components and packaging materials in accordance
with the respective waste treatment and disposal regulations of the region or
country to which the instrument is supplied.




Panel
1
3649.0Y
Panel cut-out
7. Options and accessories ... 11. Disposal