Commissioning, operation – WIKA O-10 User Manual

Page 22

WIKA operating instructions pressure transmitter model O-10

11613017.04 05/2013 GB/D/F/E

6. Commissioning, operation

CAUTION!

Prior to commissioning, the pressure transmitter must be subjected to a visual inspection.

■

Leaking fluid is indicative of damage.

■

Only use the pressure transmitter if it is in perfect condition with respect to safety.

CAUTION!

The model O-10 (T) pressure transmitter must not be exposed to any condensation.

6.1 Mechanical mounting

Required tool: Open-ended spanner (spanner width 24)

■

The sealing faces at the instrument have to be undamaged and

clean.

■

When screwing the instrument in, the force required to do this

must not be applied through the casing, but only through the

spanner flats provided for this purpose and using a suitable tool.

■

When screwing in, do not cross the threads.

■

For information on tapped holes and welding sockets, see

Technical information IN 00.14 at www.wika.com.

Spanner flats