SIRIUS XDRC2UG - Manual (Page 33)

33
the front of the vehicle . Use a blunt plastic putty knife or similar
blunt tool to lift the plastic trim just enough to tuck the cable
under underneath . Avoid side airbag locations on back pillars and
above the doors . Airbag locations are marked with “SRS” logos .
Be careful not to crimp or cut the cable .
5 . Bring the cable out from the trim near the front of the cabin and
route it under the carpet toward the dashboard or console . Coil
any excess cable in a hidden location, such as under the carpet,
keeping it away from any vehicle pedals or controls . Secure the
excess cable with wire ties (purchased separately) .
6 . Bring the end of the cable out at the PowerConnect Vehicle Dock
location . Leave yourself enough cable so you can easily connect
it to the antenna connector of the dock .
7 . Continue with “Step 5: Connect the Magnetic Mount Antenna and
PowerConnect Power Adapter” on page 39 .