Kramer Electronics RC-8iR - Manual (Page 9)

KRAMER: SIMPLE CREATIVE TECHNOLOGY
Installing the RC-8IR Universal Room Controller
6
5.1 Setting the Labels and Button Caps
To install the labels and button caps:
1. Remove the required labels from the supplied button label sheet.
2. Hold the button cap so that it is oriented as shown in
Figure 4 with the
“wings” on the left and right sides, and insert the label inside the cap.
Figure 4: Button Cap Orientation
3. Repeat for all eight caps.
4. Retaining the orientation, place the eight button caps on the buttons of
the RC-8IR (see Figure 5 ).
Figure 5: Placing the Button Cap