2 mounting the device housing, 3 mounting the rc-8ir faceplate, Mounting the device housing – Kramer Electronics RC-8iR User Manual
Page 10: Mounting the rc-8ir faceplate, Figure 6: mounting the device housing, Figure 7: mounting the faceplate
Installing the RC-8IR Universal Room Controller
7
5.2 Mounting the Device Housing
The device housing is mounted to the wall via the two housing mounting
screws holes, as illustrated in
Figure 6: Mounting the Device Housing
5.3 Mounting the RC-8IR Faceplate
1. Place the faceplate on the RC-8IR so that the two screw mounting holes
are aligned (see
).
2. Insert the two mounting screws and tighten with a screwdriver.
Figure 7: Mounting the Faceplate
See also other documents in the category Kramer Electronics Accessories for electrical:
- VM-114H (22 pages)
- VM-114H2C (25 pages)
- VM-114H4C (23 pages)
- VS-81ETH (27 pages)
- VS-81ETH (41 pages)
- VM-9T (13 pages)
- VP-12NHD (15 pages)
- VP-5R (20 pages)
- VP-6A (15 pages)
- PT-5R/T (13 pages)
- TP-102HD (13 pages)
- TP-104HD (33 pages)
- TP-112HD (13 pages)
- TP-114 (13 pages)
- TP-202 (15 pages)
- TP-205A (15 pages)
- TP-210 (14 pages)
- TP-210A (15 pages)
- tp-219hd (16 pages)
- TP-305A (15 pages)
- TP-310A (18 pages)
- TP-410 (34 pages)
- VM-1H4C (17 pages)
- VP-200xlT (31 pages)
- VP-300THD (12 pages)
- VPM-2 (42 pages)
- SI-1VGA (2 pages)
- SID-DP (2 pages)
- SID-DVI (2 pages)
- SID-H (2 pages)
- SID-VGA (2 pages)
- SID-X1 (2 pages)
- SID-X1 (23 pages)
- SID-X1N (23 pages)
- SID-X2N (31 pages)
- SID-X3N (22 pages)
- 622R (17 pages)
- VS-169TP (7 pages)
- VS-169TP (45 pages)
- WSI-1VGA (2 pages)
- TP-107AV (32 pages)
- RC-62 (94 pages)
- RC-5B2 (137 pages)
- WP-500 (2 pages)
- SV-552 (22 pages)