Figure 27: sending a map to a slot – Kramer Electronics VP-790 User Manual

Page 27

Text mode
Original mode

VP-790 Warp Generator –

Preparing a Grid

5.4.3.1

23B

Uploading via the Evaluator Controls Window

After updating/preparing the grid you can send it to the selected Warp Slot by
clicking the SEND button in the Send Warp area.

Figure 27: Sending a Map to a Slot

The warp map is now stored in one of the

VP-790 Warp memories (from 1 to 8) and

appears as a warp file in the Warp files area in the main window. Once the Warp file
appears in the window, you can upload that Warp file into a different slot.