Kramer Electronics VP-790 - Manual (Page 17)

VP-790 Warp Generator – Preparing a Grid 15
5.1
9B
Creating the Grid
You can either open a previously prepared grid (by clicking the Edit Grid button) or
open a new grid. To create a new grid, click the New Grid button. The New Grid
window appears:
Figure 14: The New Grid Window
Type the grid file name and click OK.
The new grid appears in the main window. All New Grids start with a 2x2 grid.
Editing the grid can be as simple as dragging and dropping the desired points with
the selected point being highlighted with a large, black crosshair.
The white area represents the active video area of the VP-790 and the purple
border around this represents the inactive video area (see
U
Figure 15
U
).
Figure 15: A New 2x2 Grid
The aspect ratio and shape of the active area are set to match those
of the currently active output mode of the
VP-790.
i